Basic Info.
Application
Back up Power Supply, Electric Vehicle
Trademark
Soundon New Energy
Product Description
product description
12V25Ah Lifepo4 Lithium Battery For Emergence Back Up Power , Energy Storage System
Product Parameters
Specification :
typical Capacity :25Ah 0.2C discharge
Nominal Voltage :12.8V 3.2V/Cell
End Voltage 8.0V 2.0V/Cell
Charging Current (Std.) :5A
Suggested-Continuous Charging Current (Max.) :15A
Charging Voltage :14.6V 3.65V/Cell
Charging Time (Std.) :6~7.0 hours
Charging Time (Max.) :2~3.0 hours
Discharging Current (Std.) :5A
Ambient temperature :-20~+50ºC
Discharging Current (Max.) :15A
Ambient temperature :-20~+50ºC
Suggested Peak Discharging Current (Max.) :35A <2s
Soft Pack Internal Resistance(25ºC) <70mΩ
AC Impedance 1KHz
Soft pack Weight About 2.2kg
Lifepo4 battery advantage :
LiFePO4 battery is the top energy choice for HEV, EV, UPS, electric tools and electric power storage system,as it is safe, environment-friendly and powerful with long cycle life and no memory effect.
Great cyclelife :
Lithium Iron Phosphate technology is that which allows the greatest number of charge / discharge cycles. That is why this technology is mainly adopted in Solar and wind Energy Storage , stationary energy storage systems (self-consumption, Off-Grid, UPS, etc.) for applications requiring long life.
The actual number of cycles that can be performed depends on several factors: Pevel of power in C-Rate Depth of Discharge (DOD) Operational environment : temperature, humidity, etc.
In standard environment, and for 1C cycles, we can get from the chart the below life cycle estimation for LFP2000 cycles at 100% DoD: 3000 cycles at 80% DOD 8000 cycles at 55% DOD It should be noted that following the number of completed cycle, the batteries still have a nominal capacity > 80% of the original capacity.
Lifepo4 battery cells list :
Module | Capacity (Ah) | Voltage (V) | Inner resistance (mΩ) | Thickness Max(mm) | Width Max(mm) | Height Max(mm) | Energy Density (WH/KG) | High Temp Performance (55ºC) | Low Temp Performance (-20ºC) | 3Cdischarge | cyclelife (RT 1C/1C) |
SEPFe80125256P-20Ah | 20 | 3.2 | ≤3.5 | 8.0 | 125.0 | 256.0 | 134 | ≥99% | ≥50% | ≥90% | ≥3000 times |
SEPFe90161227P-25Ah | 25 | 3.2 | ≤3.0 | 9.3 | 161.0 | 227.0 | 140 | ≥99% | ≥50% | ≥90% | ≥3000times |
SEPFe11190316P-50Ah | 50 | 3.2 | ≤1.8 | 11.3 | 190.0 | 316.0 | 140 | ≥99% | ≥50% | ≥90% | ≥3000times |
SEPFe12212268P-50Ah | 50 | 3.2 | ≤1.8 | 11.8 | 212.0 | 268.0 | 140 | ≥99% | ≥50% | ≥90% | ≥3000times |
Company Profile
An Expert Maker of LiFePO4 and NCM battery for Electric vehicle and Energy Storage system
Soundon New Energy established in 2011, which is invested by Sound Global (stock :HK00967) and stock jointed by Sound Environment (SZ000826). With a registered capital of $392 million , is an enterprise engage in technology innovation, product design and marketing of battery cathode materials, high capacity lithium ion batteries .
Our products are widely used in public lives, military affairs, aviation and transportation, energy, communication and information etc. Soundon has lithium-ion cathode material department, lithium-ion battery department and electric vehicle department, each department is in independent operation.Soundon New Energy has the ability of production 50,000 tons NCM&LiFePO4 battery Cathode material, 6 GWh high capacity li-ion battery every year.
Soundon has passed ISO9000-2015, ISO14001-2015 and IATF16949-2016
Our advantage
1.Unique lithium battery of Lamination Technology with prismatic case
1,slight bending of electrodes can be accepted.
2,the increment of thickness can be accepted.
3, internal defects can be exposed.
4,spherical heat dissipation
5,PP packaging is safer than metal or plastic packaging
2) .specilist for Electric vehicle and Energy storage battery cells in Lifepo4 , LI polymer with prismatic case
Lifepo4 battery and lipolymer battery cells models with below advantage :
- 3C high discharge current :
- longer cyclelife : lifepo4 :>3000 times lipolymer >2000times
- unique Lamination technology :
- power battery cell type for EV battery pack ,
- High density cells for Energy storage ,
- high capacity battery cells from 10Ah ~50Ah ,can flexiable assemble to any battery pack
3.International Product certification : UN38.3,CB ,CE, Rohs certification
4.Company Quality Approvals : ISO9001,ISO14001,TS16949 quality system standard approved
R&D sources
The technical laboratory testing is able to perform test independently, finish physical and chemical analysis, and another projects test and data analysis accurately, and issue supported technical report.
We have created a well-organized environment of research and development. With a total of 2000 m2of laboratory space, the factory is equipped with more than 200 high-tech machines, apparatuses and equipments. Through our years' efforts, we have gradually developed to become the leading manufacturer of lithium ion battery
QC introduction
our company Obtained ISO9001-2008 ,ISO 14001 and ISO/TS16949 certification, applied the financial ERP systems and the modern administration management system and passed all kinds of the quality standards.
Our factory has a complete Q.A. & Q.C.system. We own authorized sets of analyzing instruments with high efficiency and high sensitivity.
Everyone at Super Steroids strives to meet or exceed the expectations of customers, and aims to constantly improve both quality and service of our product, to achieve much higher level on different aspects of company in the long run.
We also have framed a well defined quality management system under the supervision of quality inspectors.
The Quality System consists of 5 main parts below:
1. Quality Training
2. Incoming Quality Control
3. In-process Quality Control
4. Reliability Testing
5. Outgoing Quality Control
Certifications
Soundon have a full-scale produce qualification such as ISO 9000:2015, ISO 140001:2015, ISO/TS 16949 and OHSA18001-2007 certification. Mostly of lithium battery products gain the national and safety explosion-proof and export permit. like CE, CB, UN38.3 and RoHS ,R100 international certification, Soundon aims to be your long-term partner, ensures product quality, on-time delivery, competitive price and user's equity!
FAQ
Why choose us?
1. The factory covers an area 20,000 m2, have a series of automatic equipment& semi-automatic equipment, production capacity has reached 300,000pcs/day.
2. ISO9001 certified factory: passed ISO9001:2015 inspection, strictly control the working environment.
3. Quality assurance: Using high-quality material and build a comprehensive quality control system from parts to finished products. Importantly 100% production inspection.
4. Professional R&D center: to cooperate with the specification, proofing process, and free samples, OEM and ODM are warmly welcomed.
5. Low MOQ: Strength factory, strong production capacity, most of the battery models have stock, can be fast dispatched.
6. Lithium battery certification with CE/CB/IEC62133/KC/PSE/ROHS/ERRCS/UN38.3, etc.
7. Most of our sales and technical team has rich lithium battery experiences of 10-15 years.
Address:
No. 78 Baishi West Road, Jiuhua District, Xiangtan, Hunan, China
Business Type:
Manufacturer/Factory
Business Range:
Auto, Motorcycle Parts & Accessories, Industrial Equipment & Components, Metallurgy, Mineral & Energy, Transportation
Company Introduction:
An Expert Maker of LiFePO4 and NCM battery for Electric vehicle and Energy Storage system
Soundon New Energy established in 2011, which is invested by Sound Global (stock: HK00967) and stock jointed by Sound Environment (SZ000826). It is an enterprise engage in technology innovation, product design and marketing of battery cathode materials, high capacity lithium ion batteries.
Our products are widely used in public lives, military affairs, aviation and transportation, energy, communication and information etc. Soundon has lithium-ion cathode material department, lithium-ion battery department and electric vehicle department, each department is in independent operation.
Soundon New Energy industrial park now covers 2 milion square meters, with the registered capital as USD 496.66 million and the total investment as USD 1.57 billion. Now We have 300 engineers covering the filed of cell designing, BMS, electrical engineering and structural designing.
Soundon New Energy has the ability of production 50, 000 tons NCM&LiFePO4 battery Cathode material, 6 GWh high capacity Li-ion battery every year.
Mostly of lithium battery products gain the CE, IEC62619, UN38.3 and RoHS, R100 international certification.